Husky Altanium Delta5 User Manual page 197

User Guide
Figure 13-4
Table 13-6
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Cable Connections
v 1.0 — February 2020
Delta5 Connectors, Typical
Delta5 Connector Identification
Cable Connection
100-240 VAC In Main AC power from the Altanium mainframe.
Ethernet Interface to customer networks.
HDMI or VGA Video signal to touch monitor.
NOTE:
EtherCAT, if Communication to UltraSync-E Gen2, Altanium Servo Control,
equipped Individual Servo Vale Gate, or Valve Gate Sequencer systems.
Inputs, if Configurable digital inputs.
equipped
Outputs, if Configurable digital outputs.
equipped
Output COMM CANBus communication to Altanium mainframe.
USB Ports Touchscreen signal to secondary touch monitor.
NOTE:
Touch Screen Touch screen signal to the primary touch monitor.
LCD 12 VDC Out Power to the primary touch monitor.
Display Port Video signal to secondary touch monitor.
NOTE:
Part Count, if Part count option signals.
equipped
Remote Load, if Remote load option signals.
equipped
Description
Some systems with motion (servo) control will utilize the VGA
connector.
Only used if controller was ordered with this option.
Only used if the controller was ordered with this option.
System Options
185