Switch Driver Commands; Figure 13-18 Stp Counter Display Example; Table 13-G Switch Driver Commands - ZyXEL Communications VES-1000 Series User Manual

Bridge Info:
(1) DesignatedRootBridgeID:
(2) RootPathCost:
(3) RootPortID:
(4) MaxAge:
(5) HelloTime:
(6) ForwardDelay:
(7) BridgeID:
(8) BMaxAge:
(9) BHelloTime:
(10) BForwardDelay:
(11) TopologyCgangeDetected:
(12) TopologyChange:
(13) TopologyChangeTime:
(14) HoldTime:
Port_0 Info:
(1) Port ID:
(2) Port State:
(3) Enable:
(4) PathCost:
(5) Designated Root:
(6) Designated Cost:
(7) Designated Bridge:
(8) Designated Port:
(9) TopologyChangeAcknowledge:
(10)ConfigPending:
(11) ForwardTransition:
STP Counter:
SendConfCount:
SendTCNCount:
RecConfigBPDU:
RecTCNBPDU:
Refer to Table 9-C for information on the fields displayed.

13.8 Switch Driver Commands

The following table shows the switch driver commands supported by the VES-1000 Series switch.
switch driver count disp
switch driver count clear
13.8.1 Display Switch Driver Counter Command
sw driver count disp
Switch-Related Commands

Figure 13-18 STP Counter Display Example

Table 13-G Switch Driver Commands

COMMAND
This command shows the switch counter.
This command clears the switch counters.
VES-1000 Series Ethernet Switch
8000-00a0c5012345
0
0x0000
5120 (1/256 sec)
512 (1/256 sec)
3840 (1/256 sec)
8000-00a0c5012345
5120 (1/256 sec)
512 (1/256 sec)
3840 (1/256 sec)
0
0
8960 (1/256 sec)
256 (1/256 sec)
0x8000
4
1
100
8000-00a0c5012345
0
8000-00a0c5012345
0x8000
0
0
1
262
0
0
0
DESCRIPTION
13-13