7.1 Introduction
To activate IEEE 802.1Q on the VES-1000 Series switch, you must enable it for the switch in menu 2, the port in
menu 6 port submenu(s) and menu 17 VLAN setup. Menu 17 allows you to enable GVRP on the switch and
configure static VLANs. See elsewhere in this manual for VLAN configuration using menus 2 and 6.
Getting Started
Advanced Applications
7.2 VLAN Setup Configuration
Select
Step 1.
802.1Q
Enter 17 from the main menu to go to Menu 17 — VLAN Setup.
Step 2.
This menu is not available (Menu 17 – VLAN Setup (N/A)) if you have not selected 802.1Q as the
VLAN Setup
This chapter shows you how to set up VLAN on the switch using SMT menu 17.
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
VES-1012 Main Menu ()
1. General Setup
2. Switch Setup
3. IP Setup
6. Port Setup
12. Static Routing Setup
17. VLAN Setup
Enter Menu Selection Number:
Figure 7-1 Main Setup Menu
as the VLAN Type in Menu 2 — Switch Setup.
VLAN type in Menu 2 – Switch Setup.
VES-1000 Series Ethernet Switch
VLAN Setup
Advanced Management
22. SNMP Configuration
23. System Password
24. System Maintenance
99. Exit
Chapter 7
7-1