Front Panel; Front Panel Ports; Figure 2-2 Ves-1008 Front Panel; Figure 2-3 Ves-1012 Front Panel - ZyXEL Communications VES-1000 Series User Manual

VES-1000 Series Ethernet Switch
To connect the VES-1012 only, plug the female end of the power cord to the power receptacle on the rear panel.
Connect the other end of the cord to a power outlet. Make sure that no objects obstruct the airflow of the fans
(located on the side of the unit).

2.3 Front Panel

The following figure shows the front panel of the VES-1012 only. The VES-1008 has a combined USER/CO
Telco-50 connector and displays 8 VDSL ports instead of the 12 that are on the VES-1012. The VES-1008 also
has the socket and switch for the power supply located on the front panel.

2.4 Front Panel Ports

CONNECTOR
CONSOLE The CONSOLE port is an RS-232 port for local configuration of the VES-1000 Series
switch.
USER/CO The combined USER/CO port is a Telco-50 connector for external POTS/ISDN and VDSL
connections.
Two 10/100 Mbps These ports connect to a Ethernet switch or WAN router.
RJ-45 connectors
CONNECTOR
CONSOLE The CONSOLE port is an RS-232 port for local configuration of the VES-1000 Series
switch.
CO The CO Telco-50 port connects to the central office or a PBX.
USER The USER Telco-50 port connects to the user (subscriber) VDSL equipment.
Two 10/100 Mbps These ports connects to a Ethernet switch or WAN router.
RJ 45 t
2-2

Figure 2-2 VES-1008 Front Panel

Figure 2-3 VES-1012 Front Panel

Table 2-A VES-1000 Series Switches: Front Panel Ports

VES-1008 FRONT PANEL PORTS
VES-1012 FRONT PANEL PORTS
DESCRIPTION
DESCRIPTION
Hardware Connections