Static Route Setup; Creating A Static Route; Figure 6-1 Menu 12 - Static Route Setup; Figure 6-2 Menu 12.1 - Edit Ip Static Route - ZyXEL Communications VES-1000 Series User Manual

6.1 Creating a Static Route

Enter 12 from the main menu to go to Menu 12 – Static Route Setup.
Choosing a static route to edit displays the following screen.
The following table describes the fields for Menu 12.1 - Edit IP Static Route Setup.
FIELD
Route #
Route Name
Active
Destination IP
Address

Static Route Setup

Static routes tell the VES-1000 Series switch how to forward management traffic.
Enter selection number:
Figure 6-1 Menu 12 – Static Route Setup
Menu 12.1 — Edit IP Static Route
Route #: 1
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Press ENTER to Confirm or ESC to Cancel:

Figure 6-2 Menu 12.1 - Edit IP Static Route

Table 6-A Edit IP Static Route Menu Fields

This is the index number of the route as listed in Menu 12 — IP Static
Route Setup.
Enter a descriptive name for this route. This is for identification purpose
only.
This field allows you to activate/deactivate this static route.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number. If you need to specify a
t t i l h t
Static Route Setup
Menu 12 – Static Route Setup
1. ___________
2. ___________
3. ___________
4. ___________
5. ___________
6. ___________
7. ___________
8. ___________
DESCRIPTION
b t k f 255 255 255 255 i th
VES-1000 Series Ethernet Switch
Chapter 6
EXAMPLE
Yes
6-1