ZyXEL Communications VES-1000 Series User Manual page 105

FIELD
Current This is the current voltage reading.
Max This field displays the maximum voltage measured at this point.
Min This field displays the minimum voltage measured at this point.
Tolerance (%) Five percent is the acceptable deviation from the nominal voltage.
Status "Normal" indicates that the voltage is within an acceptable operating range at
this point.
COMMANDS:
r-Reset status Enter "r" to refresh all the counters in this menu.
ESC-exit Press [ESC] to exit this menu and return to SMT menu 24.
If an error is detected:
The associated Status field in Menu 24.12 — Hardware Monitor will display Error.
The ALM (alarm) LED on the front panel will light.
To clear an alarm, enter "r" in Menu 24.12 — Hardware Monitor.
System Maintenance 2
Table 11-E Menu 24.12 - Hardware Monitor
DESCRIPTION
VES-1000 Series Ethernet Switch
EXAMPLE
2.03
5%
Normal
r
[ESC]
11-7