Olivetti PGL2545 Operation Manual page 80

ThinPrint Activation (Optional Feature)
This printer can select whether or not to communicate using ThinPrint.
For more details on operation, refer to Op Functions (Optional application settings) on page 4-154.
Secure Pull Printing (Optional Feature)
Secure Pull Printing is a printing feature where a user pulls the print job to a printer selected after the job is spooled in a
server. To use this feature, the following system environments are required.
6. The user pulls
the print job from
the selected printer.
3. The user logins to the
printer or other MFP via
an Authentication Server
using an ID card.
The Authentication server: Olivetti Net Manager (Optional Software) must be installed.
ID card and ID card reader: they are used to register and authenticate a user.
The Spooler server: it sends the print job to a selected printer after the user logs in.
For more details, contact your dealer or service representative.
Printing by Google Cloud Print
Google Cloud Print is a printing service provided by Google and does not require a Printing System Driver. This service enables
a user with a Google account to print from a machine connected to the Internet.
The machine can be configured in the Embedded Web Server RX. Refer to the Embedded Web Server RX User Guide.
Note A Google account is necessary to use Google Cloud Print. Obtain a Google account if you do not have one.
It is also necessary to register the machine with the Google Cloud Print service in advance. The machine can be
registered from a PC connected to the same network.
Printing with Wi-Fi Direct
Wi-Fi Direct is a wireless LAN standard that Wi-Fi Alliance has been established. This is one of the functions of the wireless
LAN, without a wireless LAN access point or wireless LAN router, between devices can communicate directly on a peer to
peer basis.
The printing procedure by the Wi-Fi Direct is the same as that from the normal handheld devices.
When you use a printer name or Bonjour name on the port settings of the printer property, you can print the job by specifying
the name at Wi-Fi Direct connection.
When you use an IP address for the port, specify the IP address of this machine.
2. The spooler server
5. The spooler
receives the print job.
server sends the
print job to the
selected printer.
4. The Authentication
Server confirms the
login information
registered.
3-9
Printing
1. A user sends
the print job to the
spooler server.