Olivetti PGL2545 Operation Manual page 31

IPv4 Setting:
Subnet Mask
04
05 Default Gateway
06 Bonjour
Entering the Default Gateway
When DHCP is set to Off, enter the Default Gateway manually.
Default Gateway:
0.
23
24
Exit
25
26
0. 0. 0
27
28
Use the numeric keys or  or  to set the subnet mask.
You can set any value between 000 and 255.
The method for entering is the same as for the IP Address.
Press [OK]. The subnet mask setting is stored and the IPv4
Setting menu reappears.
Press  or  to select Default Gateway.
Press [OK]. The Default Gateway screen appears.
Use the numeric keys or press  or  to set the default gateway.
You can set any value between 000 and 255.
The method for entering is the same as for the IP Address.
Press [OK]. The default gateway is stored and the IPv4 Setting
menu reappears.
This completes the network settings. Press [Menu] and end the
mode selection menu.
Note When the network settings have been changed, restart
the network card of the device. This is mandatory to make
the settings effective. For details, refer to Restart Network
(Restarting the network card) on page 4-81.
2-6
Preparation before Use