Olivetti PGL2545 Operation Manual page 233

Service Setting (for Maintenance)
IMPORTANT Service Setting is primarily a menu used by service personnel for maintenance work.
Item Description
Service Status The service status page contains printer settings information that is more detailed than
the standard status page and is therefore mostly for service purposes. However, there
is a great deal of information on the service status page that may be useful to you.
Network Status The network status page contains detailed information on the network settings.
This is primarily used for maintenance by service personnel, but it contains
information that may also be useful to you.
Op Netwk Status The option network status page contains detailed information on the network
settings. This is primarily used for maintenance by service personnel, but it
contains information that may also be useful to you.
Note The Op Netwk Status menu is only displayed when the optional
Network Interface Kit (IB-50) or Wireless Network Interface Kit (IB-51) is installed.
Test Page The test page is printed to check the effectiveness of printer adjustments. This is
primarily used for maintenance by service personnel, but it contains information
that may also be useful to you.
Maintenance This specifies the setting for confirmation of replacement with the new
Maintenance Kit (resets the total number of Maintenance Kit print images). This
is primarily used for maintenance by service personnel.
Note The Maintenance menu is displayed only when Replace MK. appears.
Drum This sets the refresh mode for the drum. When the printing quality declines,
refreshing the drum can restore the printing quality. This is primarily used for
Drum2
maintenance by service personnel.
Note Drum2 does not appear with PG L2545.
New Developer This specifies the setting for confirmation of replacement with the new
Developer (resets the total number of Developer print images). This is primarily
used for maintenance by service personnel.
Auto DrumRefresh An automatic drum refresh is sometimes carried out when the power supply is
switched on or when the machine recovers from sleep mode. In order to
maintain the image quality, the automatic drum refresh is implemented
automatically after observing the surrounding temperature and humidity.
Here, the time for carrying out the automatic drum refresh is set.
Normally set it to Standard. If Off or Short is selected, the best image quality
may not be kept.
Drum Heater This sets the On/Off of the drum heater integrated in the machine.
When Drum Heater is set to On, the drum heater continues to start, but the drum
refresh is not carried out.
When the machine is installed in a high humidity environment, the start up time
can be shortened.
Note This setting does not appear in some regions.
Write Data This writes data to USB memory.
Note This menu only appears when a USB memory device is inserted.
4-152
Operation Panel
Value
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Off, Short,
Standard, Long
Off, On
Yes, No