Olivetti PGL2545 Operation Manual page 148

Netwk Authentic. (Network Authentication setting)
This sets the authentication method to be used when connecting to an access point.
Note You can also configure the network authentication setting for WPA-Enterprise and WPA2-Enterprise using
the web page of the optional Wireless Network Interface Kit (IB-36). For details, refer to the Embedded Web Server RX
User Guide.
Netwk Authentic.:
* Open
01
WPA2/WPA-PSK
02
03 WPA2-PSK
Encryption (Encryption settings)
This selects the encryption settings.
Encryption:
01 Data Encryption
WEP Key
02
WEP Key Index
03
Data Encryption (Data Encryption setting)
This sets the encryption method.
4
Press [OK]. The Custom Setup menu reappears.
1
In the Custom Setup menu, press  or  to select Netwk
Authentic..
2
Press [OK]. The Netwk Authentic. screen appears.
The available authentication methods are as follows:
Open
WPA2/WPA-PSK
WPA2-PSK
WPA2/WPA-EAP
WPA2-EAP
3
Press  or  to select the desired authentication method.
4
Press [OK]. The Custom Setup menu reappears.
1
In the Custom Setup menu, press  or  to select Encryption.
2
Press [OK]. The Encryption screen appears.
The following operations are possible:
• Data Encryption (Data Encryption setting)...4-67
• WEP Key (WEP Key settings)...4-68
Exit
• WEP Key Index (WEP Key Index Settings)...4-68
• Preshared Key (Preshared Key settings)...4-68
1
In the Encryption menu, press  or  to select Data
Encryption.
Note WEP Key and WEP Key Index is displayed when
Netwk Authentic. (Network Authentication setting) on page 4-
67 is set to Open.
Preshared Key is displayed when Netwk Authentic.
(Network Authentication setting) on page 4-67 is set to WPA2/
WPA-PSK or WPA2-PSK.
4-67
Operation Panel