Olivetti PGL2545 Operation Manual page 190

Except for Europe
There are two sleep modes with different levels of sleep: Quick Recovery and Energy Saver.
Quick Recovery Mode: The recovery from the sleep mode is faster than when using Energy Saver mode.
Energy Saver Mode: This makes it possible to reduce energy consumption even further than with Quick Recovery mode.
With Energy Saver mode, you can set whether to enable the Energy Saver mode for each separate function.
Note For information on the Quick Recovery mode and Energy Saver mode, refer to Energy Saver Function on page 2-36.
When the optional Network Interface Kit (IB-50), Wireless Network Interface Kit (IB-51) or Parallel Interface Kit (IB-
32B) has been installed, the Sleep Level Set. menu is not displayed and the machine will enter the Quick
Recovery mode.
Sleep Level Set.:
01 Sleep Level
Status
02
Sleep Level:
01 Quick Recovery
* Energy Saver
02
Sleep Level Set.:
Sleep Level
01
Status
02
Status:
Network
01
02 USB Cable
Card Reader
03
1
In the Timer Setting menu, press  or  to select Sleep Level
Set..
2
Press [OK]. The Sleep Level Set. menu screen appears.
Exit
3
Press  or  to select Sleep Level.
4
Press [OK]. The Sleep Level screen appears.
5
Press  or  to select Quick Recovery or Energy Saver.
6
Press [OK]. The sleep level is set and the Sleep Level Set.
menu reappears.
When Energy Saver is set, next go on to set whether or not to use
Energy Saver mode for each function.
Exit
7
Press  or  to select Status.
8
Press [OK]. The Status menu screen appears.
Next set whether or not to use Energy Saver mode for each function.
Item
Network (Network interface setting)
Exit
USB Cable (USB interface setting)
Card Reader (ID card reader setting)
NIC (Option Network Interface Kit (NIC) setting)
Parallel Cable (Parallel interface setting)
4-109
Note Status is only displayed when Energy Saver is set.
Note Card Reader is only displayed when the ID card
reader function has been activated.
Parallel Cable is only displayed when the optional
Parallel Interface Kit (IB-32B) has been installed.
Operation Panel
Default Value
On
On
Off
Off
Off