Available Net.:
01
Wi-Fi Direct
Wi-Fi
02
Wired Network
03
Wi-Fi Direct:
Disable
01
*
Enable
02
Primary Network (Select the network interface to use)
Specify the network to be used for the send function, the network authentication.
Note This setting is is only displayed when the optional Network Interface Kit (IB-50) or Wireless Network Interface
Kit (IB-51 or IB-36) is installed.
Primary Network:
01
*
Wi-Fi
Wired Network
02
Optional Network
03
Ping (Checking the connection of a connected device)
Checks if communication with the destination by entering the host name or IP address of the destination is possible.
Note This setting is displayed when the setting for Primary Network (Select the network interface to use) on page
4-80 is set to other than Optional Network.
Ping:
2
Press [OK]. The Available Net. menu screen appears.
3
Press or to select the item for which you want to make settings.
4
Press [OK]. This displays the setting screen for the item selected in
step 3.
The screen shown is the one when Wi-Fi Direct is selected.
5
Press or to select Disable or Enable.
6
Press [OK]. The Available Net. menu screen reappears.
1
In the Network menu, press or to select Primary Network.
2
Press [OK]. The Primary Network screen appears.
3
Press or to select Wi-Fi, Wired Network or Optional
Network.
4
Press [OK]. The Primary Network is set and the Network menu
reappears.
1
In the Network menu, press or to select Ping.
2
Press [OK]. The Ping screen appears.
ABC
Text
Note Wi-Fi is only displayed when the optional Wireless
Network Interface Kit (IB-36) is installed.
Optional Network is only displayed when the optional
Network Interface Kit (IB-50) or Wireless Network Interface Kit
(IB-51) is installed.
4-80
Operation Panel