Olivetti PGL2545 Operation Manual page 28

Menu Submenu
Network Protocol
Settings
Restart Network
Security Network
Security
Note When the network settings have been changed, restart the network card of the device. This is mandatory to
make the settings effective. For details, refer to Restart Network (Restarting the network card) on page 4-81.
Network Settings
This section explains the settings for when DHCP is used or when an IP Address is entered while TCP(IPv4) is selected.
For details of the settings, refer to Network (Network settings) on page 4-60. Also, for how to use the Menu Selection
System, refer to Using the Menu Selection System on page 4-7.
Note When entering an IP Address manually, check the IP Address, Subnet Mask and Default Gateway with the
system administrator.
Menu:
Report
01
02 Counter
Paper Settings
03
Network:
Host Name
01
02 Wired Netwk. Set
03 ProtocolSettings
HTTP Off/On
HTTPS Off/On
LDAP Off/On
ThinPrint Off/On
Port Number
ThinPrintOverSSL
WSD-PRINT Off/On
EnhancedWSD Off/On
(SSL)
Enhanced Off/On
WSD
SSL Setting SSL
1
While the printer displays Ready to print., Please wait. and
Processing., press [Menu]. The mode selection menu is
displayed.
Exit
2
Press  or  to select Network.
3
Press [OK]. The Network menu screen appears.
Exit
4
Press  or  to select Wired Netwk. Set.
Off/On
2-3
Preparation before Use
Setting
On/Off
On/Off
On/Off
On/Off
1 - 32767
On/Off
On/Off
On/Off
On/Off
Yes/No
On/Off