Olivetti PGL2545 Operation Manual page 147

PIN (Device) (Connect using a PIN code (for the Wireless Network Interface Kit))
The connection is started using the PIN code for the machine. The PIN code displayed should be entered at the access
point. The PIN code for the machine is generated automatically.
Start the PIN code
setup.
Are you sure?
Yes
Enter the PIN code
into the access point
and press [Next].
PIN:xxxxxxxx
PIN code
Custom Setup (Detailed settings for the wireless network)
It is possible to change the detailed settings of the wireless network.
Custom Setup:
01 Netwk Name(SSID)
Netwk Authentic.
02
Encryption
03
Connect
Netwk Name (SSID) (Registration of the access point's SSID)
This sets the SSID (Service Set Identifier) for the wireless network access point the machine will be connected to.
Netwk Name(SSID):
1
In the Quick Setup menu, press  or  to select PIN (Device).
2
Press [OK]. The message Start the PIN code setup. Are
you sure? appears.
No
3
Press [Yes] ([Left Select]). A PIN code is displayed on the
Message display.
Next
4
Write down the PIN code displayed on the Message display.
5
Press [Next] ([Right Select]). The message Connecting...
appears.
6
At the access point, immediately enter the PIN code which wrote
down on step 4. The connection with the access point starts.
1
In the Wireless Network menu, press  or  to select Custom
Setup.
2
Press [OK]. The Custom Setup menu screen appears.
The following operations are possible:
• Netwk Name (SSID) (Registration of the access point's SSID)...4-
66
Exit
• Netwk Authentic. (Network Authentication setting)...4-67
• Encryption (Encryption settings)...4-67
1
In the Custom Setup menu, press  or  to select Netwk
Name(SSID).
2
Press [OK]. The Netwk Name(SSID) entry screen appears.
ABC
Text
3
Enter the access point's SSID using the numeric keys.
Note Up to 32 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
4-66
Operation Panel