Olivetti PGL2545 Operation Manual page 241

Custom Box operation (Box creation, editing and deletion)
It is possible to create Custom Boxes and change Box settings.
The following operations are possible:
• Custom Box creation...5-4
• Editing and Deleting Custom Boxes...5-10
• Sorting the Custom Box list...5-11
• Searching Custom Boxes...5-11
• Setting automatic document deletion for Custom Boxes...5-12
Note The creation and setting of Custom Boxes is also possible from Embedded Web Server RX. For more information,
refer to the Embedded Web Server RX User Guide.
Custom Box creation
Create a Custom Box. Enter the Box Name and Box Number then it is possible to continue on and set the details of the Box.
Note When user login administration is enabled, log in as a user with administrator authority.
Box Name Entry:
Box Number Entry:
(0001 - 1000)
Box 01:
01 Exit
Detail
02
1
ABC
Text
2
3
0001
4
5
6
In the Custom Box list screen, press [Add] ([Right Select]). The
Box Name Entry screen appears.
Enter the Box Name using the numeric keys.
Note Up to 32 characters can be entered.
For details on entering characters, refer to Character Entry
Method on page A-2.
Press [OK]. The Box Number Entry screen appears.
Use the numeric keys or press  or  to enter the Box Number.
Note Enter the Box Number as a four-digit number from 0001 -
1000.
Press [OK].
Press  or  to select Detail or Exit then press [OK].
To set the details of the Box, select Detail and proceed to Detailed
box settings on page 5-5.
If the details of the Box will not be set then select Exit and finish the
operation.
5-4
Document Box