Olivetti PGL2545 Operation Manual page 116

Custom PaperSize (Setting a Custom Paper Size)
In the procedure below, select the units to be used for entering the custom paper size and then enter the paper width and
length. As shown in the figure, enter the Y and X values for the paper size, using the selected units.
Cassette 1 Set.:
01 Media Type
02 Other Paper Size
Custom PaperSize
03
Oufuku Hagaki (#3)
Oficio II 216x340mm
16K
Statement
Folio
Youkei 2 (#1) Youkei 4 (#1)
#1 Only when optional paper feeder PF-320 is installed.
#2 Cassette 1 for the PG L2550, PG L2555 .
#3 Cassette 1 except for the PG L2545.
5
Press  or  to select the desired paper size.
6
Press [OK]. The paper size for the cassette is set and the Cassette
# Set. menu screen reappears.
If you selected Custom in step 4, use the procedure below to specify
the paper length and width.
X Dimension
Cassette:
105 to 216 mm (4.13 to 8.5 inches)
Paper Feeder PF-320:
92 to 216 mm (3.62 to 8.5 inches)
1
In the Cassette # Set. menu, press  or  to select Custom
PaperSize.
# shows the number of the cassette installed in the printer (1 to 5).
Exit
Note When Custom is selected, it is possible to enter the
paper size. For details, refer to Custom PaperSize (Setting a
Custom Paper Size) on page 4-35.
Cassette:
148 to 356 mm (5.83 to 14.02 inches)
Paper Feeder PF-320:
162 to 356 mm (6.38 to 14.02 inches)
4-35
Operation Panel