Olivetti PGL2545 Operation Manual page 108

XPS FitTo Page (Adjusting the XPS file print out size)
Select On in this setting to enlarge or reduce XPS files to fit the printable area during printing.
Function:
Quiet Mode
01
Duplex
02
03 EcoPrint
XPS FitTo Page:
* Off
01
02 On
Detail (Shows the details of the selected file)
Use this to view detailed information on the files and folders in the USB memory.
Detail:
File Name:
ABCDEFGHIJKLMNOPQRST…
Detail:
Folder Name:
ABCDEFGHIJKLMNOPQRST…
• Print Resolution
4
Press  or  to select whether TIFF/JPEG Size mode is enabled.
5
Press [OK]. The TIFF/JPEG Size setting is set and the Function
menu reappears.
1
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press  or  to select XPS FitTo Page.
3
Press [OK]. The XPS FitTo Page screen appears.
4
Press  or  to select whether XPS FitTo Page mode is enabled.
5
Press [OK]. The XPS FitTo Page setting is set and the Function
menu reappears.
1
Use the procedure described in Print File (Printing and checking the
files in the USB memory) on page 4-21 to display a list of the files or
folders you want to check.
2
Press  or  to select the folder or file you want to check.
3
Press [Detail] ([Right Select]). The Detail screen appears.
If you selected a file, there are 4 Detail screens. Press  or  to
1/ 4
move between the screens.
Detail
If you selected a folder, there are 2 Detail screens. Press  or  to
move between the screens.
1/ 2
Pressing [OK] while file or folder details are displayed returns you to
the Print File menu.
Detail
Images are printed using a 1-to-1 correspondence between the
image file pixels and printed dots. For example, the printed size
of a 600 × 300-pixel image file is 1 inch × 1/2 inch.
Note Images are automatically rotated during printing to
provide a closer match between the aspect ratios of the
image file and the paper used for printing.
4-27
Operation Panel