Multiple Wan Configuration; Multiple Wan Management Settings - TRENDnet TEW-929DRU User Manual

TRENDnet User's Guide
• Server Port – Enter the port used for the RADIUS service.
Note: The default port used for RADIUS server authentication is 1812.
• Server Secret – Enter the shared secret used to authorize the router for use with
the external RADIUS server.
• Confirm Secret – Re-enter the shared secret for confirmation.
• Timeout – Enter the RADIUS server authentication timeout value in seconds. This is
the number of seconds between transmissions for authentication requests.
Note: If you encounter issues with repeated authentication attempts, it is
recommended to increase this value.
• Retries – Enter the number of retries allowed before RADIUS server will deny
authentication requests for a specific user.
• Allow local account login – Checking this option will still allow login to the router
configuration page using the internal administrator account.
© Copyright 2023 TRENDnet. All Rights Reserved.

Multiple WAN Configuration

Multiple WAN Management Settings

Multi-WAN / QoS > Multiple WAN
The section provides an overview of the multiple WAN management settings and the
dual WAN mode functionality.
1. Log into your router management page (see
on page 6).
2. Click on Multi-WAN / QoS and click on Multiple WAN.
3. Review the settings below. When complete, click Apply to save and commit your
changes.
Note: Multiple WAN diagnostics can be used under Administrator > Diagnostics under
the MWAN Interface Diagnostics section.
TEW-929DRU
"Access your router management page"
45