Download Print this page
TRENDnet TEW-639GR Quick Installation Manual

TRENDnet TEW-639GR Quick Installation Manual

Trendnet - wireless-n gigabit router with 4-port switch
Hide thumbs Also See for TEW-639GR:

Advertisement

Quick Installation Guide
TEW-639GR
3.01

Advertisement

loading

Summary of Contents for TRENDnet TEW-639GR

  • Page 1 Quick Installation Guide TEW-639GR 3.01...
  • Page 2: Table Of Contents

    Table of Contents English 1. Before You Start 2. Hardware Installation 3. Configure the Wireless Router Troubleshooting Wireless Tips Version 05.05.2011...
  • Page 3: English

    1. Before You Start Package Contents Ÿ TEW-639GR Ÿ Multi-Language Quick Installation Guide Ÿ CD-ROM (User's Guide) Ÿ Network Cable (1.5m / 5ft) Ÿ Power Adapter (12V DC, 1A) System Requirements Ÿ A computer with a wired or wireless network adapter properly installed (Note: It is recommended that you configure the Wireless Router from a wired computer) Ÿ...
  • Page 4 Collect Internet Service Provider (ISP) Information Please verify your Internet broadband connection type with your ISP and ensure you have all the information for one of the following connection types: 1. DHCP (Dynamic IP Address) Host Name (Optional): ________________ Manually Configure DNS (Enable/Disable) Primary DNS Server: _____.
  • Page 5 5. L2TP Server IP Address / Name: ________________ User Name: ________________ Password: ________________ Address Mode: Dynamic IP Address or Static IP Address IP Address:_____. _____._____._____ (e.g. 215.24.24.129) Subnet Mask: _____. _____._____._____ Operation Mode (Keep Alive, On Demand, Manual) Keep Alive Mode Redial Period (Default: 10 seconds) On Demand Mode Idle Time (Default: 5 minutes) Primary DNS Server: _____.
  • Page 6: Hardware Installation

    Cable or DSL modem. Open your browser (e.g. Internet Internet Explorer) and type in a URL (e.g. Cable/DSL Modem http://www.trendnet.com) in the address bar. 2. Power off your cable or DSL modem. 3. Disconnect the network cable from your Cable or DSL modem and your computer.
  • Page 7 7. Move the power switch to the “On” position (EU version only). 8. Power on your cable or DSL modem. Wait until the LEDs indicate that modem is fully booted up. Consult with the modem user's guide for more information. 9.
  • Page 8: Configure The Wireless Router

    3. Configure the Wireless Router Note: It is recommended that you configure the Wireless Router from a wired computer. 1. Open your web browser, type http://192.168.10.1 in the Address bar, and then press Enter. 2. Enter the User Name and Password and then click OK.
  • Page 9: Register Your Product

    Internet connection. Your configuration is now complete For detailed information regarding the TEW-639GR’s configuration and advanced settings, please refer to User's Guide included on the CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register...
  • Page 10: Troubleshooting

    Troubleshooting 1. I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-639GR's web configuration page? 1. Check your hardware settings again by following the instructions in Section 2. 2.
  • Page 11 Windows XP/2000 Go into the Control Panel, double-click the Network Connections icon and then right- click the Local Area Connection icon and then click Properties. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Obtain an IP address automatically. 2.
  • Page 12 (EU Version only) Reset Button Hold 15 seconds to reset device to factory defaults. WPS Button Hold 3 seconds to activate WPS If you still encounter problems or have any questions regarding the TEW-639GR, please contact TRENDnet's Technical Support Department.
  • Page 13: Wireless Tips

    Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues.
  • Page 14 2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. 3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall.
  • Page 18 Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
  • Page 19 Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register Copyright ©2011. All Rights Reserved. TRENDnet.