Table of Contents
Advertisement
TRENDnet User's Guide
L2TP VPN Server
Security > VPN > L2TP Server
You can enable and configure the L2TP VPN server on your router to allow remote
computers or mobile devices with L2TP support to connect securely over the Internet
and access the company LAN network. It is strongly recommended to enable L2TP VPN
server with IPsec instead of L2TP VPN only due to the higher degree of security offered
and supported on most modern computers and mobile devices.
Setting up the L2TP VPN server without IPsec encryption
1. Log into your router management page (see
on page 6).
2. Click on Security, click VPN, and click the L2TP Server tab.
3. Under Service Setting, check the Enable option to enable the L2TP server.
4. In the Local IP field, enter the LAN IP address. (Default LAN IP: 192.168.10.1)
Note: Entering the LAN IP address as the Local IP of the L2TP server ensures your L2TP
VPN clients are able to access the Internet and the router LAN network via full tunneling.
If an IP address different from the LAN IP is entered, L2TP VPN clients will be allowed to
access router LAN and not the Internet.
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your router management
page"
5. In the Client IP field, enter an IP address range (within the same LAN IP subnet range)
to assign to L2TP VPN clients. By default, the router LAN DHCP server pool is
192.168.10.101-192.168.10.199, therefore, we will assign a range that does not conflict
with the DHCP server range such as 192.168.10.10-192.168.10.20.
6. Check the Access LAN option to ensure VPN clients can access the router LAN
interface. Note: If VLANs interfaces are created, they will available under Access vlan.
7. Click the Authentication drop-down list and select MS-CHAPv2.
8. Under the User Account section, enter a profile name for the new user account and
click Add. (e.g. User1)
9. Check the Enable option and enter a User name and Password for the new user
account. (e.g. User name: user1 / Password: user1)
10. Click Apply and the bottom of the page so save and commit the changes.
TEW-929DRU
57
Advertisement
Table of Contents
