Table of Contents
Advertisement
TRENDnet User's Guide
13. Under Common Configuration and General Setup, click the Protocol drop-down list
and select the appropriate protocol (Static address, DHCP client, PPTP, PPPoE, L2TP) for
your Internet connection. DHCP client is the typical protocol in which the connection
settings are automatically obtained by your ISP (Internet Service Provider). If you are
unsure about the Internet connection settings, please contact your ISP for details. After
you have completed the Internet connection settings, click Apply to save and commit
the changes.
14. To configure your wireless network name/SSID and wireless encryption settings,
click Network and click the wireless band you would like to configure. Wireless 2.4GHz,
or Wireless 5GHz.
Note: By default, the wireless network name/SSID has been pre-configured for your
convenience and can be located on the included wireless settings sticker or on the device
label located on the bottom of the router. If you are modifying the wireless settings, you
will need to connect to the router with your WiFi clients using the new settings.
© Copyright 2019 TRENDnet. All Rights Reserved.
15. To change the wireless network name/SSID for the selected wireless band, under
Interface Configuration and General Setup, enter the new name in the ESSID field and
click Apply to save and commit the changes.
Note: The wireless network name/SSID is the name your WiFi clients will need to search
and discover when connecting to your router wireless network.
16. To change the wireless encryption key for the selected wireless band, under
Interface Configuration Wireless Security, enter the new encryption in the Key field and
click Apply to save and commit the changes.
Note: WPA2-PSK AES wireless encryption is strongly recommended. The wireless
encryption key is the key your WiFi clients will need to enter when connecting to your
router wireless network.
TEW-829DRU
5
Advertisement
Table of Contents
