Add Static Arp Entries - TRENDnet TEW-929DRU User Manual

TRENDnet User's Guide
4. Enter the parameters for the static host name entry and click Apply to save and
commit the changes.
•
Hostname – Enter the host name. (e.g. trendnetpc)
•
IP Address – Enter the IPv4 address to resolve to host name. (e.g.
192.168.50.150)

Add static ARP entries

Network > LAN
ARP (Address Resolution Protocol) is the protocol responsible for resolve IP addresses to
hardware MAC addresses. Typically, ARP entries are dynamically learned and refreshed
in the ARP table however, in the case where your application requires static ARP entries
to always be present in the router ARP table, you can manually enter and add them to
the router. (ex. applications: WoL (Wake on LAN) or Wake on WAN)
1. Log into your router management page (see
on page 6).
2. Click on Network and click LAN.
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your router management page"
3. Under the Static ARP section, click the MAC-Address drop-down list to select a MAC
address from the list or select customer to manually enter a MAC address (format
example: aa:bb:cc:dd:ee:ff).
4. Click the IPv4-Address drop-down list and select the IPv4 address to assign to the
MAC address ARP table entry or select custom to manually enter an IPv4 address
(format example: 192.168.10.129)
5. Click Apply to save and commit the changes.
Note: You can specify additional static ARP entries by clicking Add. Delete existing
entries by clicking the Delete button next to the entry to be removed.
TEW-929DRU
12