Wan Port Configuration - TRENDnet TW100-BRF114U User Manual

Broadband Router User Guide

WAN Port Configuration

The WAN Port option is on the Advanced menu.
Data – WAN Port Screen
Identification
Normally, there is no need to change the default name, but if your
Hostname
ISP requests that you use a particular Hostname, enter it here.
If your ISP provided a domain name, enter it here. Otherwise, this
Domain Name
may be left blank.
Also called Network Adapter Address or Physical Address. This is a
WAN Port MAC
low-level identifier, as seen from the WAN port.
Address
Normally there is no need to change this, but some ISPs require a
particular value, often that of the PC initially used for Internet access.
You can use the Copy from PC button to copy your PC's address into
this field, the Default button to insert the default value, or enter a
value directly.
IP Address
Automatic Also called Dynamic IP Address. This is the default, and the most
common.
Leave this selected if your ISP allocates an IP Address to the Broad-
band Router upon connection.
Figure 43: WAN Port Screen
64