Table of Contents
Advertisement
TW100-BRV304 User Guide
WAN Port Configuration Screen
The WAN Port Configuration screen provides an alternative to using the Wizard. It can be
accessed from the Internet menu. An example screen is shown below.
Identification
Hostname
Domain name
IP Address
IP Address
is assigned auto-
matically
Specified
IP Address
Figure 7: WAN Port
Normally, there is no need to change the default name, but if your
ISP requests that you use a particular "Hostname", enter it here.
If your ISP provided a domain name, enter it here. Otherwise, this
may be left blank.
Also called Dynamic IP Address. This is the default, and the most
common.
Leave this selected if your ISP allocates an IP Address to the Wire-
less Router upon connection.
Also called Static IP Address. Select this if your ISP has allocated
you a fixed IP Address. If this option is selected, the following data
must be entered.
•
IP Address.
The IP Address allocated by the ISP.
•
Network Mask (Not required for PPPoE)
This is also supplied by your ISP. It must be compatible with the
IP Address above.
•
Gateway IP Address (Not required for PPPoE)
The address of the router or gateway, as supplied by your ISP.
•
DNS IP Address
The DNS (Domain Name Server) IP Address provided by your
ISP. If required, additional DNS entries can be made on the
Internet Options screen.
14
Advertisement
Table of Contents
