Router Maintenance And Monitoring; Managing Access To The Router Management Interface; Local Access Management; Remote Access Management - TRENDnet TEW-929DRU User Manual

TRENDnet User's Guide

Router Maintenance and Monitoring

Managing access to the router management interface

Administrator > Access Management
This section will allow you to restrict access router management access to specific
interfaces. By default, management access to the web interface (HTTP) is restricted only
to the LAN interface.
1. Log into your router management page (see
on page 6).
2. Click on Management and click on Access Management.
3. Review the settings below. When complete, click Apply to save and commit your
changes.

Local Access Management

• Limit access by interface – Checking this option will allow you to select specific local
interfaces (e.g. LAN, VLAN) that are allowed access to the router management
interface.
o
Allowed interfaces – The available local interfaces will be in this
section. (e.g. Selecting LAN will only allow management access from
the LAN and all other VLAN interfaces will be denied.)
• Enable HTTPS – Checking this option will enable secure HTTPS (SSL) access to the
router management page on the selected local interfaces.
• Enable Telnet – Checking this option will enable command line interface access via
Telnet on the selected local interfaces.
• Enable SSH – Checking this option will enabled secure command line interface
access via SSH (Secure Shell) on the selected local interfaces.
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your router management page"

Remote Access Management

• Limit access by interface – Checking this option will allow you to select specific
WAN interfaces (e.g. WAN1, WAN2) that are allowed access to the router
management interface over the Internet.
o
Allowed interfaces – The WAN1 and WAN2 interfaces will be in this
section. (e.g. Selecting WAN1 will only allow management access from
the WAN1 interface and will deny management access on the WAN2
interface.
• Enable HTTPS – Checking this option will enable secure HTTPS (SSL) access to the
router management page on the selected WAN interfaces.
• Enable Telnet – Checking this option will enable command line interface access via
Telnet on the selected WAN interfaces.
• Enable SSH – Checking this option will enabled secure command line interface
access via SSH (Secure Shell) on the selected WAN interfaces.
TEW-929DRU
78