Table of Contents
Advertisement
TRENDnet User's Guide
Create time schedules
System > Schedule
Your router allows you to create schedules to specify a time period when a feature
should be activated and deactivated. Before you use the scheduling feature on your
router, ensure that your router system time and date settings are configured correctly.
1. Log into your router management page (see
on page 6).
2. Click on System and click Schedule.
3. Review the settings below. Click Add to add the new schedule to the list and Apply to
save and commit the changes.
•
Name – Enter a name for the new schedule rule.
•
Days – Choosing Daily will set the set the schedule rule to occur at the specified
time every day. Choosing Select Day(s) will allow to manually select which
specific days for the schedule.
•
All Day – 24 Hrs – Checking this option will set the schedule to run all 24 hours
instead of manually configured a specified time period.
•
Start Time / End Time – Manually define a time period for the schedule.
Note: The time period is specified in 24 hour format.
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your router management
page"
Change LAN IPv4 address settings
Network > LAN
Note: The default LAN interface IPv4 address settings is 192.168.10.1 / 255.255.255.0
and also assigned to LAN ports 1-8 by default. If the LAN IPv4 address settings are
modified, you will need to log into the router management page with the new IPv4
address settings.
1. Log into your router management page (see
on page 6).
2. Click on Network and click LAN.
3. Under the Common Configuration section, you can enter the new LAN interface IP
address settings.
•
IPv4 address – Enter the new LAN IPv4 address. (e.g. 192.168.50.1)
•
IPv4 netmask – Select or Enter the new LAN IPv4 subnet mask. The drop-down
menu will list class A, B, C, or custom which will allow you to manually enter a
custom subnet mask. (e.g. 255.255.255.0)
4. Click Apply to
TEW-929DRU
"Access your router management
page"
8
Advertisement
Table of Contents
