Wan Port Configuration - TRENDnet TW100-BRV204 User Manual

WAN Port Configuration

The WAN Port Configuration screen provides an alternative to using the Wizard. It can be
accessed from the Internet menu. An example screen is shown below.
Figure 26: WAN Port Configuration Screen
Data – WAN Port Configuration Screen
Identification
Hostname Normally, there is no need to change the default name, but if your
ISP requests that you use a particular "Hostname", enter it here.
If your ISP provided a domain name, enter it here. Otherwise, this
Domain name
may be left blank.
MAC Address Also called Network Adapter Address or Physical Address. This is a
low-level identifier, as seen from the WAN port.
Normally there is no need to change this, but some ISPs require a
particular value, often that of the PC initially used for Internet access.
You can use the Copy from PC button to copy your PC's address into
this field, the Default button to insert the default value, or enter a
value directly.
IP Address
IP Address Also called Dynamic IP Address. This is the default, and the most
common.
is assigned auto-
matically Leave this selected if your ISP allocates an IP Address to the
TW100-BRV204 upon connection.
Internet Features
41