Ipsec (Internet Protocol Security); Setting Up Ipsec Site-To-Site Vpn (Psk) - TRENDnet TEW-929DRU User Manual

TRENDnet User's Guide
10. You can choose to enter the account credentials in the fields provide for
authentication or if not, you will be prompted when attempting to establish PPTP VPN
connection to your TEW-829DRU router. Click Save.
11. Under VPN, the new VPN connection will be listed. Click Connect.
12. The status will display Connected if the PPTP VPN connection was successful.
© Copyright 2023 TRENDnet. All Rights Reserved.

IPsec (Internet Protocol Security)

Setting up IPsec site-to-site VPN (PSK)

Security > VPN > IPsec
To configure and IPsec site-to-site VPN tunnel with pre-shared key (PSK) between two
routers:
•
Ensure that your router is connected to the Internet and computers and
devices are able to access the Internet through your router and make note of
the WAN (Internet) IP assigned to both routers under the Status > Overview
page.
Example:
VPN Router A WAN1 (Internet) IP Address:
VPN Router B WAN1 (Internet) IP Address:
•
Make sure the LAN IP network on each VPN router is a different IP subnet.
Note: Changing the LAN IP address of your router will change the LAN IP
network of your router.
Example:
VPN Router A LAN IP Settings: 192.168.10.1 / 255.255.255.0
VPN Router B LAN IP Settings: 192.168.100.1 / 255.255.255.0
TEW-929DRU
10.10.10.10
10.10.10.20
59