Multiple Wan Configuration; Multiple Wan Management Settings; Mwan Status; Link Tracking - TRENDnet TEW-829DRU User Manual

TRENDnet User's Guide

Multiple WAN Configuration

Multiple WAN Management Settings

Network > Multiple WAN
The section provides an overview of the multiple WAN management settings and the
dual WAN mode functionality.
1. Log into your router management page (see
on page 8).
2. Click on Network and click on Multiple WAN.
3. Review the settings below. When complete, click Apply to save and commit your
changes.
Note: Multiple WAN diagnostics can be used under Administrator > Diagnostics under
the MWAN Interface Diagnostics section.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your router management page"

MWAN Status

 Interface Live Status – This section displays the current status of the WAN
interfaces of your router. Tracking is enabled using physical link status and L2 based
methods but the tracking status displayed refers to the status of IP based link
tracking which can be configured under the Link Tracking section.
Link Tracking – Allows you to setup WAN link tracking by pinging Internet IP addresses.
 Enable Tracking – Checking this option enables IP based WAN link tracking on the
specific WAN interface.
 Tracking IP – Enter an Internet IP address to send ping requests used to verify the
link status of a specific WAN interface. You can add additional IP address by clicking
.
 Ping Interval – Click the drop-down list to set the time interval between
consecutive ping requests.
 Fail Count – Click the drop-down list to set the maximum number of failed ping
requests before interface status is considered to be down or failed.
TEW-829DRU
54