Omega DP461-S User Manual page 106

9
Meter Function Menus
MENU
BUTTON
MAIN
MENU
"RD.SC.OF":
* The 'MIN' button allows you to sequence through "INPUT 1", "READ 1",
"INPUT 2", and "READ 2" headings.
The 'MAX' button sends you to the value corresponding to "INPUT 1",
"READ 1", "INPUT 2", or "READ 2" so you can change it (go to the SUB
MENU 2 item).
** The 'MIN' button allows you to step through the digits of the applicable
number being changed.
The 'MAX' button changes the value of the digit to be displayed.
The 'MENU' button stores the selected values for each input required in
"RD.SC.OF". After the last value ("READ 2") has been entered and the
'MENU' button is pressed, the meter display will advance to "IN CNF".
Every underlined item is the factory preset value.
Meter now stores all scale and offset values for "IN.SC.OF", "RD.SC.OF",
Note
and "OT.SC.OF".
The meter will display previously input values when entering these menus. If
system decimal point changes, all values will be modified accordingly; if
overflow occurs meter will flash that parameter with 999999.
9-10
MIN/MAX
MIN/MAX* /MENU**
BUTTON BUTTON
SUB MENU 1 SUB MENU 2 DESCRIPTION
INPUT 1
000000.
("00000.0")
READ 1
000000.
("00000.0")
INPUT 2
000000.
("10000.0")
READ 2
000000.
("10000.0")
READING SCALE & OFFSET
Item #1 of Coordinate #1
Enter the first value displayed
by the meter.
Item #2 of Coordinate #1.
Enter first desired value.
Item #1 of Coordinate #2.
Enter the second value
displayed by the meter.
Item #2 of Coordinate #2.
Enter second
desired value.