Documents That Require Special Care - Savin IS330DC Setup Manual

Setting the Document

Documents that Require Special Care

Make sure to take care in setting the document according to the following in-
structions when scanning the following types of documents.
1
Documents whose size is difficult to scan
As the following documents are difficult to scan their size, the correct size will
not be selected, even if the automatic size detection has been set. The sizes for
these documents should be manually set.
• Documents with projecting parts such as indices or attached lines
• Document with a high degree of transparency such as tracing paper or
OHP film
• Documents which are fully dark in color or which have a high content of
character or graphic patterns
• Documents with partially adhesive areas
• Documents with surrounding adhesive areas
Documents that cannot be set into the Automatic Document Feeder (ADF)
The following types of documents should not be set into the Automatic Doc-
ument Feeder (ADF) as these can cause paper jams, damage to the original
document, or black and white lines. If these types of documents are to be
used, use the Contact Glass of the scanner.
• Documents with staples or paper clips
• Documents with holes and rips
• Documents with bends, folds or wrinkles
• Pasted documents
• Thermal paper, art paper, aluminum foil, carbon paper, or processed pa-
per with conductive paper on the back
• Perforated paper
• Documents with projecting parts such as indices or attached lines
• Documents that do not slide easily such as tracing paper (translucent paper)
• Documents that are thin and soft, such as registration paper
• Documents that have an unsuitable thickness such as postcards
• Documents that are bound such as books
• Documents that have a high transparency rate such as OHP film or tracing
paper
• Documents with not completely dried ink or correction liquid
4