Introduction - Savin IS330DC Setup Manual

Introduction

ScanRouter V2 Link can monitor in-trays in the delivery server (ScanRouter V2 Pro-
fessional/ScanRouter V2 Lite) in the network and notify of documents received from
a network device in a client computer. Also, ScanRouter V2 Link can automatically
receive the received documents sent by the client computer and delete them from the
delivery server. You can set to save the automatically received documents as below.
• The documents are saved in the specified location. The documents can be dis-
played by launching a specified application.
• If ScanRouter V2 Link and DeskTopBinder V2 are installed in the same ma-
chine, the documents are added in the [My Work Folder] of DeskTopBinder V2.
The documents can be displayed by DeskTopBinder V2.
FAX
SCN
1. delivery server
2. Client Computer
3. Received in in-tray
Note
❒ In the WAN environment, do not use ScanRouter V2 Link installed in a client
computer. Depending on the network, timeout may occur and documents
cannot be delivered normally during connection.
❒ Set up an environment correctly when the ScanRouter V2 Administration
Utility, DeskTopBinder V2, or ScanRouter V2 Link is used in the dial-up con-
nection computer. ⇒ P.6 "Dial-up-related Device"
❒ Fax documents received from a facsimile can be used for ScanRouter V2 Pro-
fessional only.
❒ When Scan Type is set to GrayScale or Color, resolution is set to 600 dpi, or a
large image is read in the connecting device, processing after documents are
received automatically may take time depending on documents received. In
this case, we recommend that you increase the CPU processing capability,
memory size, or hard disk capacity of the client computer.
1
FAX
SCN
4. Monitoring
5. Auto-Receiving/Notification
3
4
SCN FAX
5
2
GGFMICOJ
1