Displaying Contents Of A Document - Savin IS330DC Setup Manual

DeskTopBinder V2 Lite Introduction Guide

4.2 Displaying Contents of a Document

The following methods are available to display the contents of a
document:
■ Using Easy Viewer
Select [Easy Viewer] from the [View] menu or click the Easy
Viewer button on the toolbar. Then select a document from
the document list pane.
■ Using Viewer
From the [Document] menu, select [Open in Viewer].
■ Using an Application
Three methods are available:
・ Double-click a document composed of one section created
with an application file.
・ In the Thumbnails view, select a section, and then select
[Open in Application] from the [Document] menu.
・ In the Icon view, Details view, or Calendar view, select a
document containing only one section, and then select
[Open in Application] from the [Document] menu.
Displaying a Document Using Easy Viewer
You can easily display the contents of a document section by
section.
Click , and then select a document on the document list pane.
The size of the Easy Viewer window is changeable.
1 ： [Previous Section][Next Section] Buttons
Use these buttons to move through the sections of a
document.
2 ： [Open Viewer] Button
Use this to start Viewer. Easy Viewer is canceled.
3 ： Current Section Number/Total Section Number
Shows the current section number and the total number of
sections.
4 ： [Launch] Button
Launches an application. Easy Viewer is canceled.
5 ： [Previous Document][Next Document] Buttons
Use these buttons to move from document to document.
6 ： [90 ﾟ Left] [90 ﾟ Right] [180 ﾟ ] Buttons
Use these buttons to rotate a displayed section image.
The rotated image cannot be saved.
7 ： Section Name
≪ Note ≫
・ Easy Viewer can display image sections only.
4
9