Understanding The Indicators - Savin IS330DC Setup Manual

Getting Started

Understanding the Indicators

This unit is equipped with the following indicators.
1
1.
Power On
2.
Machine Busy
Under normal circumstances, the indicators of this unit are as follows. Under
other circumstances, an error reading will occur. Refer to resolve the error.
✩
✩
✩
✩
✩
✩
#
#
✩:On
#:Flashing
-:Off
6
1 2
✩ ✩
- -
✩
-
✩
-
✩ ✩
#
-
- -
#
-
3 4
ZDLH030E
3.
Document in Place
4.
Error
Description
When switching on the power or
✩
when performing a hard reset
(for only a few seconds)
When the Automatic Document
Feeder (ADF) contains no docu-
-
ments and scanning is not taking
place
When the Automatic Document
- Feeder (ADF) contains a document
but scanning is not taking place.
During the transmission of scanned data
-
(No Documents in the ADF)
During the transmission of scanned data.
-
(Documents in the ADF)
During standby for manual scan.
-
(Before pressing the {Start} key)
- During the Low Power mode
When manual scan is in the standby
-
mode during the Low Power mode.