Maintenance; Backing Up And Restoring - Savin IS330DC Setup Manual

Using ScanRouter V2 Administration Utility

Maintenance

The ScanRouter V2 Administration
Utility has the following maintenance
functions. Make sure that delivery
service is suspended before begin-
ning maintenance.
• Back Up
• Restore
3
• Recover
• Return to Installation Defaults

Backing Up and Restoring

All system information can be backed
up in any directory on the delivery
server. It is recommended that back-
ups be made regularly.
To restore backup data, use the Re-
store function. Unneeded backup
data may be deleted with the Delete
Backup Data function.
Note
❒ To make backups, use the Scan-
Router V2 Administration Utility
configured on the delivery server.
❖ ❖ ❖ ❖ Backing Up
Select [Back Up] from the [Mainte-
nance] menu to save to the backup
directory. If there is an error
caused by insufficient disk space
during backup, change the backup
location or delete unnecessary
files, and then back up again.
24
❖ ❖ ❖ ❖ Restoring Backup Data
Select [Restore] from the [Mainte-
nance] menu, and then select the
backup data to use.
Important
❒ The Restore function should
only be used when there is no
alternative.
❒ The Restore function returns the
system to the state it was in
when the backup was made. All
data or changes saved since the
backup will be lost.
❖ ❖ ❖ ❖ Deleting Backup Data
Select [Delete Backup Data] from the
[Maintenance] menu, and then select
the data to delete.
Note
❒ When backing up or restoring
the system, do not perform any
other operations.