Basic Settings - Savin IS330DC Setup Manual

After Installation

Basic Settings

You can set an "administrator pass-
word," a "Destination," and "network
device" at least required to operate the
delivery server. Turn on the power of
the network device in advance. Some
devices do not require its settings. For
more information, see the [Management
Guide] or [Readme] on the Start menu,
or Help. To display Help, select [Help]
on the operation dialog box.
A
Launch the ScanRouter V2 Ad-
4
ministration Utility.
A Select [Start] and point to [Pro-
grams]to select [ ScanRouter V2
Administration Utility] from the
[ScanRouter V2] folder.
The ScanRouter V2 Administra-
tion Utility launches and a dia-
log box for entering a password
appears.
B Since the password is not set
immediately after installation,
select [OK] without entering
anything.
The "ScanRouter V2 Administra-
tion Utility" dialog box appears.
B
Set an administrator's password.
Set an administrator's password in
the ScanRouter V2 Administration
Utility so that the settings cannot
be changed.
A Click [Set Administrator] from
the [Server] menu.
The [Set Administrator] dialog
box appears.
B Enter a new password (within
eight alphanumeric characters)
in two [Password] boxes.
Since the lower [Password] box is
used for confirmation, enter the
same password as the upper
password.
14
C Click [OK].
The password has been set.
C
Set up a network device if re-
quired.
A Select [Set I/O Device] from the
[Server] menu.
The "Set I/O Device" dialog box
appears.
B Select [Add].
The "Add I/O Device" dialog
box appears.
C Enter the host name or IP ad-
dress of the network device to
be used for delivery, and select
[OK].
Note
❒ You can select [Browse] to se-
lect the network device.
The selected network device is
displayed on the "Set I/O De-
vice" dialog box.
D Select [OK].
D
Register a user as a destination.
Documents are delivered and
saved for each in-tray. When the
user is registered in the ScanRout-
er V2 Administration Utility, an in-
tray for the user is used, and you
can use it to specify the destination
of documents.
Note
❒ If the same document is deliv-
ered to multiple users, you
should create a group.
Limitation
❒ Up to 100 users can be regis-
tered together with groups.