Installing Scanrouter V2 Administration Utility In A Client Computer; System Requirements; Scanrouter V2 Administration Utility Instllation - Savin IS330DC Setup Manual

ScanRouter V2 Lite Installation
Installing ScanRouter V2 Administration
Utility in a Client Computer
You can install the ScanRouter V2
Administration Utility in a client
computer to manage the delivery
server from the client computer.
Note
❒ Set up an environment correctly
3
when the ScanRouter V2 Adminis-
tration Utility is used in a dial-up
connection computer.
❒ You need not individually install
the ScanRouter V2 Administration
Utility in the delivery server in
which ScanRouter V2 Lite is al-
ready installed.

System Requirements

Before installing ScanRouter V2 Ad-
ministration Utility, make sure your
computer meets the following system
requirements:
• Computer
PC/AT compatible computer
• One of the following operating
systems:
Microsoft Windows 95 Operating
System Release 2 or later
Microsoft Windows 98
Microsoft Windows 98 Second
Edition
Microsoft Windows Millennium
Edition
Microsoft Windows NT Worksta-
tion 4.0 Service Pack 5 or later
Microsoft Windows NT Server 4.0
Service Pack 5 or later
Microsoft Windows 2000 Profes-
sional
Microsoft Windows 2000 Server
10
• CPU
Pentium 133 MHz or faster
(Pentium II 266 MHz or faster rec-
ommended)
• RAM
48 MB or more
(64 MB or more recommended)
• Hard Drive Space Available
50 MB or more (200 MB recom-
mended)
• Display
800×600 pixel 64 K color or better is
recommende
ScanRouter V2 Administration
Utility Instllation
A
Display the "Set up ScanRouter
V2 Lite" dialog box of ScanRouter
V2 Lite.
B
Select [ScanRouter V2 Administration
Utility].
A dialog box for confirming instal-
lation start appears.
C
Select [Yes].
D
Select [Next] on the displayed dia-
log box.
E
Confirm the software license
agreement and select [Yes].
"Select Installation Destination"
appears.