Installation Of Image Processing Unit (Image Processing Unit Type A) - Savin IS330DC Setup Manual

Getting Started
F
Attach the IEEE 1394 Board to the
scanner control unit, and then fas-
ten in place with the screws re-
moved in step
1
included w ith the IEEE 1394
Board.
G
Be sure to attach firmly, and con-
firm that there are no metal ob-
jects or other foreign objects on
the scanner control unit.
H
Insert the scanner control unit
into the scanner, and then fasten
in place with the four screws.
I
Connect the cables to the scanner,
and then connect the Power Cord.
Installation of Image Processing
Unit
(Image Processing Unit Type A)
Important
❒ Before touching the image process-
ing unit, make sure to first touch a
metal object to discharge any static
electricity accumulated in your
body.
Note
❒ Please use only the tools provided
f or re m o vi ng an d t ig h te n ing
screws.
14
E
and the screws
ZDLH160E
A
Check the contents of the box for
the following items:
• Image Processing Unit Type A
• Tools
B
Turn off the power of the scanner
and unplug the Power Cord and
all other cables that are connected
to it.
C
Remove the four screws at the
bottom of the back panel.
D
Pull and slide the scanner control
unit out.
Important
❒ The control unit is very heavy.
Be careful not to drop it when
removing.
ZDLH230E
ZDLH230E