Appendix; Setting Of The Dip Switches - Savin IS330DC Setup Manual

Setting of the DIP Switches

Only the settings for 2 or 3 DIP Switches can be changed for this unit. Do not
make other changes.
Important
Depending on the SCSI cable used, there is a possibility of malfunction dur-
ing simultaneous transmission. In this case, set the 2nd DIP switch to ON
(SCSI :simultaneous transmission disabled).
When switching off the SCSI built-in terminator, set the 3rd DIP switch to ON
(SCSI built-in terminator OFF).
Leave in the OFF position and do not change.
OFF: SCSI built-in terminator ON
ON: SCSI built-in terminator OFF
OFF: SCSI simultaneous transmission enabled
ON: SCSI simultaneous transmission disabled
Leave in the OFF position and do not change.

4. Appendix

ZDLS040E
25