Choosing A Display Mode - Furuno CHS-5LMARK-2-55 Operator's Manual

1. OPERATIONAL OVERVIEW
1.3.5

Choosing a display mode

Three display modes are available: NORMAL, COMBI-1 and COMBI-2. To choose the
display mode, do the following:
1. Press the MENU key to open the menu. The last-used menu is displayed.
2. Use the RANGE control to choose [MENU MODE] at the top of the screen.
3. Use the GAIN key to choose [SONAR].
4. Use the RANGE control to choose [DISPLAY MODE].
5. Use the GAIN control to choose desired mode among [COMBI-1], [NORM] and
[COMBI-2].
6. Press the MENU key to close the menu.
Mode description
Mode
NORM
(Sonar
display)
COMBI-1
(Sonar +
Audio)
COMBI-2
(Sonar +
echo-
sounder)
1-6
Description
This mode is useful for detecting
and tracking schools of fish. Navi-
gation data can be displayed in the
text window, with connection of ap-
propriate sensors.
Sonar picture appears on the left
and the audio display at the lower
right side of the screen. This mode
is useful analyzing echoes in a de-
sired area.To activate the [COMBI-
1] mode, do the following:
1) Choose the [COMBI-1] mode.
2) Use the trackball to place the
trackball mark (+) on the bear-
ing desired.
3) Press the R/B key. The range
and bearing marks are in-
scribed on the sonar picture,
and the signal along the bear-
ing mark appears in the audio
display.
The sonar picture appears on the
left and the signal fed from the
echosounder at the lower right side
of the screen. This mode is suit-
able for judging school of fish con-
centration.
Display
Text window
Sonar display
Range and bearing marks
Text window
Audio display
Sonar display
Text window
Echosounder
display
Sonar display