Horizontal Mode; Basic Operating Procedure - Furuno FSV-25S Operator's Manual

2.

HORIZONTAL MODE

2.1

Basic Operating Procedure

1.
Turn on power.
2.
Lower transducer.
Mid protrusion key programmed to [Fixed Position]:
Transducer stops at mid protrusion position.
DOWN/STOP
Mid protrusion key programmed to [Any Position]:
Transducer stops at desired position.
Full protrusion
DOWN/STOP
5.
4.
Press to choose the screen (horizontal or vertical,
or horizontal1 or horizontal2)
to adjust gain and range.
6.
Adjust gain.
3.
Select horizontical display.
Control unit
7.
Set tilt angle.
Select range.
2-1