3. ADJUSTMENTS
3.10
How to Backup/Load All Settings
3.10.1
How to backup all settings
You can backup all your menu settings (except language, IP address, date and time,
oil replacement date, motor running time) with the following procedure.
1. Press the MENU/ESC key to open the menu.
2. Select [5 Record/Recall/Register].
3. Select [8 Setting File].
4. Select [4 Save Ship's Original].
The message "Are you sure to execute this item?" appears.
5. Select [Yes].
The file name, which appears in the [File Name] box, is automatically assigned as
shown below.
FSV75_OriginalFile_yyyy_mm_dd_hh_mm_ss.ini
6. Select where to save the setting data, from the drop-down list of destinations.
7. Select [Save].
The progress bar shows the saving progress. After the settings are saved, the
[Setting File] menu appears.
8. Press and hold the MENU/ESC key to close the menu.
Note: The error message "Disk space insufficient. Delete unnecessary files." appears
if the save destination does not have sufficient space (a minimum of 500MB is re-
quired). If this occurs, select [Delete Data] to delete unnecessary files, then repeat the
above procedure.
3.10.2
How to load backed-up settings
1. Press the MENU/ESC key to open the menu.
2. Select [5 Record/Recall/Register].
3. Select [8 Setting File].
4. Select [5 Recall Ship's Original].
The message "Are you sure to execute this item? (Restart is required)" appears.
3-14
Save
File Location
Drop-down list of destinations
Drop-down list of destinations
Progress bar
Progress bar
Fills in blue color, from left-to-right,
Fills in blue color, from left-to-right,
indicating the save progress.
indicating the save progress.
File
Name
Save
Cancel