Lcd Contrast; Ring Settings; Ring Setting; Disable Ringer - Fortinet FortiFone FON-260i User Manual

Hide thumbs Also See for FortiFone FON-260i:
Table of Contents

Advertisement

LCD Contrast

The contrast of the LCD is adjustable for best viewing angle.
To adjust the LCD contrast:
• Press the
• Select 1. LCD Contrast then press the OK button.
• Press the Down navigation button to decrease the contrast, or press the Up navigation
button to increase the contrast.
• Press the Left navigation button to save your entry.
• Move to another parameter with the navigation buttons and continue the session or press
the

Ring Settings

The IP phone has 4 ring tones (Ring Types) and a no ring (Disable Ringer) option for incoming
call notification. There is also the option to assign each phone book record one of the ring tones
for inbound calls. The Default Ring Tone is used when a ring tone is Set as Default or not defined
for a line or phone book record.

Ring Setting

• To adjust the Ring Type for a line:
• Press the
• Select 2. Ring Settings then press the OK button.
• Select the Ring Type using the Down navigation button to hear the selected tone, then press
the OK button to save the selection.
• Move to another parameter with the navigation buttons and continue the session or press
the

Disable Ringer

The phone can be programmed not to ring when an incoming call is received. It will still light up
the LCD, light up the Incoming Call Indicator and show the Caller ID.
To disable the ringer:
• Press the
• Select 3. Disable Ringer then press the OK button.
• Using the navigation buttons, select Yes to turn the ringer off, or No to leave the ringer
enabled. Press the OK button.
• Move to another parameter with the navigation buttons and continue the session or press
the
Configuring your Phone
button, select 3. Phone Settings then press the OK button.
button to exit the configuration session.
button, select 3. Phone Settings then press the OK button.
button to exit the configuration session.
button, select 3. Phone Settings then press the OK button.
button to exit the configuration session.
Page 20
FortiFone User Guide for FON-260i

Advertisement

Table of Contents
loading

Table of Contents