Sip Configuration, General Parameters; Outbound Proxy Address; Outbound Proxy Port - Fortinet FortiFone FON-260i User Manual

SIP Configuration, General Parameters

Parameters in this section are required for the overall SIP operation of the phone.

Outbound Proxy Address

If required, an Outbound Proxy Address can be defined so that the phone sends all SIP
requests to the proxy instead of the SIP server configured in the section
on page
To assign an Outbound Proxy Address:
• Press the
• Select 2. Outbound Proxy Addr. then press the OK button.
• Input the Outbound Proxy Address using the dial pad and press the OK button to save your
entry.
• Move to another parameter with the navigation buttons and continue the session or press
the
Changing the Outbound Proxy Address requires a reboot of the phone. When you exit the
menu, you will receive a reboot notice. Press the OK button to reboot. The IP phone must
reboot to utilize the new values entered.
To enter alphanumeric characters select the
for Dial Pad Mode" on page 61

Outbound Proxy Port

With the Outbound Proxy Server defined, the associated port must be defined as the Outbound
Proxy Port. All SIP requests are sent to the assigned port instead of the proxy port configured in
the section
• To assign the Outbound Proxy Port:
• Press the
• Select 3. Outbound Proxy Port then press the OK button.
• Input the Outbound Proxy Port using the dial pad and press the OK button to save your
entry.
• Move to another parameter with the navigation buttons and continue the session or press
the
Changing the Outbound Proxy Port requires a reboot of the IP phone. When you exit the menu,
you will receive a reboot notice. Press the OK button to reboot. The IP phone must reboot to
utilize the new values entered.
Configuring your Phone
12. The address can be an IP address or FQDN.
button, select 2. SIP Configuration then press the OK button.
button to exit the configuration session.
for the character mapping of dial pad digits.
"Proxy Port" on page
button, select 2. SIP Configuration then press the OK button.
button to exit the configuration session.
button. Refer to
12.
Page 15
"SIP Server Address"
"Appendix B. Character Table
FortiFone User Guide for FON-260i