Table of Contents
Advertisement
•
Press the
button, select 4. Call Preferences, then 8. Access Code Prefix.
•
Enter the hunt group you normally use to place outgoing calls (example: 9), then press
the OK softkey.
Phone Settings
Under the Phone Settings menu, the following parameters can be altered.
1 — LCD Contrast
2 — Ring Settings
3 — Disable Ringer
4 — Headset Auto Mode
5 — Programmable/Flexible Key Settings
6 — Time Configuration
7 — Firmware Update
8 — Speed Dial Number
9 — Key Tone
10 — Language
11 — Backlight
12 — Bluetooth (Optional on FortiFone-550i only)
LCD Contrast
The contrast of the LCD is adjustable for best viewing angle.
To adjust the LCD contrast:
•
Press the
button, select 3. Phone Settings then 1. LCD Contrast.
•
Press the Down softkey to decrease the contrast, or
press the Up softkey to increase the contrast.
•
To configure another parameter, press the Back
softkey to continue or press the
the configuration menu.
Ring Settings
The IP phone has 9 ring tones and a no ring (Disable Ringer) option for incoming call
notification. There is also the option to assign each phone book record one of the ring
tones for inbound calls. The Default Ring Tone is used when a ring tone is Set as Default or
not defined for a line or phone book record.
In quieter environments, it might be useful to delay the ring signal on incoming calls.
Ringing can be delayed by up to 10 seconds. The LED light associated to your extension
will flash immediately for all incoming calls.
1 4
F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E S T A R T G U I D E
button to exit
FortiFone-550i
Advertisement
Table of Contents
