Switching Modes - YASKAWA Varispeed G7 Series Instruction Manual



Switching Modes

The mode selection display will appear when the MENU Key is pressed from a monitor or setting display.
Press the MENU Key from the mode selection display to switch between the modes.
Press the DATA/ENTER Key from the mode selection key to monitor data and from a monitor display to
access the setting display.
Display at Startup
-DRIVE-
Frequency Ref
U1- 01=60.00Hz
U1-02=60.00Hz
U1-03=10.05A
Mode Selection
Display
-DRIVE-
** Main Menu **
-QUICK-
** Main Menu **
Quick Setting
-ADV-
** Main Menu **
-VERIFY-
** Main Menu **
Modified Consts
-A.TUNE-
** Main Menu **
IMPORTANT
-6
3
Rdy
MENU
DATA
ENTER
-DRIVE-
U1 - 01=60.00Hz
Operation
U1-02=60.00Hz
U1-03=10.05A
ESC
MENU
DATA
ENTER
-QUICK-
Control Method
A1-02=2
Open Loop Vector
ESC
MENU
DATA
ENTER
-ADV-
Initialization
A1
Programming
Select Language
ESC
MENU
DATA
ENTER
-VERIFY-
None Modified
ESC
MENU
DATA
ENTER
-A.TUNE-
Tuning Mode Sel
T1- 01=0
Auto-Tuning
Standard Tuning
ESC
When running the Inverter after using Digital Operator, press the MENU Key to select the drive mode (dis-
played on the LCD screen) and then press the DATA/ENTER Key from the drive mode display to bring up the
monitor display. Run Commands can't be received from any other display. (Monitor display in the drive mode
will appear when the power is turned ON.)
Monitor Display
>
RESET
Rdy -DRIVE-
Monitor Reference Source
U1- 01=60.00Hz
U1-02=60.00Hz
U1-03=10.05A
ESC
DATA
ENTER
*2*
ESC
>
RESET
-ADV-
Select Language
- 00=1 A1- 00
English
ESC
DATA
ENTER
1 *0*
"0"
ESC
Fig 3.3 Mode Transitions
Setting Display
DATA
ENTER
DATA
ENTER
Rdy -DRIVE-
Frequency Ref
U1- 01=060.00Hz
(0.00¬
"0.00Hz"
ESC
-QUICK-
Control Method
A1-02=
Open Loop Vector
ENTER
DATA
ENTER
-ADV-
Select Language
=0 A1- 00=
*1*
English
ESC
If a user constant has been changed,
the constant number will be displayed.
The user constant can be changed with
the DATA/ENTER Key.
-A.TUNE-
Tuning Mode Sel
T1- 01=
Standard Tuning
"0"
Rdy
® 60.00)
2 *2*
DATA
0 *1*
0 *0*