The following settings are made with the monitor constants (U constants): Setting constants for monitoring in
drive mode.
Status Monitor Constants: U1
The constants used for monitoring status are listed in the following table.
Name
Con-
stant
Display
Number
Frequency
reference
Monitors/sets the fre-
U1-01
quency reference value.
Frequency
Ref
Output
Monitors the output fre-
frequency
U1-02
quency.
Output Freq
Output
current
Monitors the output cur-
U1-03
rent.
Output
Current
Control
method
Checks the current control
U1-04
method.
Control
Method
Motor speed Monitors the detected
U1-05
motor speed.
Motor Speed
Output
Monitors the output volt-
voltage
U1-06
age reference value in the
Output
Inverter.
Voltage
DC bus
voltage
Monitors the main DC
U1-07
voltage in the Inverter.
DC Bus
Voltage
Output
power
Monitors the output power
U1-08
(internally detected value).
Output
kWatts
Torque
Monitor in internal torque
reference
U1-09
reference value for vector
Torque
control.
Reference
* 1. The unit is set in o1-03 (frequency units of reference setting and monitor).
* 2. The unit differs according to the Inverter capacity. (The unit is 0.01 A for an Inverter capacity of 0.4 to 7.5 kW, and 0.1 A for an Inverter capacity of