Setting up the Scanner
I I I I
Fix the scanner control unit with three screws.
J J J J
Removed cables must connect in former state.
Installing the IEEE1394 Interface Board
Important
2
❒ Touch any metallic material before touching the IEEE interface board to re-
move static from your body.
Note
❒ The optional IEEE 1394 interface board is alternatively used with the USB in-
terface board.
A A A A
Turn OFF the power to this product and disconnect all cables connected to
the product, including the power cable.
B B B B
Remove the three screws on the lower back surface of the product.
C C C C
Pull out the scanner control unit by pulling the black ribbon on the center
of the board.
Important
❒ The control unit is heavy. Please take care not to drop it when pulling it
out.
18
ADC009S
ADC010S