Table of Contents
Advertisement
Guide to Components
1
1.
Pressure Panel
Holds the originals down on the Expo-
sure Glass.
2.
Background Panel for Exposure
Glass
Panel to set the background color for the
original in black or white when you place
the original on the exposure glass. ⇒ p.54
"Changing the Color of the Background
Panel for the Exposure Glass"
3.
ADF Exposure Glass
Scans the originals when they are loaded
by the ADF.
4.
Exposure Glass
Set the original here when you do not use
the ADF scanning.
5.
ADF Cover
Open when clearing the misfed originals
or cleaning the rollers.
8
6.
Lock Screw
This is to lock the scanning parts inside
when you transport this machine. Re-
move this screw when you set up this
machine.
7.
USB 2.0 Interface Connector
Used for connection of an USB cable. The
USB interface board is alternatively used
with the optional IEEE1394 interface
board.
8.
Lock Lever
Set this lever to the "Lock" position when
you transport this machine.
9.
SCSI Interface Connector
Used for connection of a SCSI Cable.
10.
SD Card Slot
Used for an authorized customer engi-
neer's maintenance only.
11.
Power Connector
For connection of the bundled AC power
code.
ADC003S
Advertisement
Table of Contents
