Precautions Concerning The Ieee1394 Interface - Ricoh IS330DC - IS - Flatbed Scanner Operating Instructions Manual

Precautions Concerning the IEEE1394 Interface

Please take the following precautions when using the IEEE1394 interface for
scanning with this unit.
• If the power of this unit is switched OFF when the Scanner driver is being ac-
cessed or if the power is OFF when the Scanner driver is started up, the PC
will freeze. When scanning using the IEEE1394 interface, do not switch OFF
the power of this unit. Always make sure the power of this unit is switched
ON before scanning.
• When multiple IEEE1394 compatible devices are connected with multiple
PC's, the operation of the scanner may become unstable. Please confirm prop-
er operation of the scanner when connecting multiple IEEE1394 compatible
devices.
• If an IEEE1394 device is detached while scanning is being performed or data
is being transmitted, the scanning or transmitting will be interrupted. Con-
nect the IEEE1394 compatible device and switch the power on or off only
when the machine is in standby mode.
• Up to 4 PC's can be logged in simultaneously.
• IEEE1394 Interface can only be available on WindowsMe, Windows2000.
• The TWAIN Driver can only be used when the scanner is connected to a com-
puter via an IEEE1394 Interface. An ISIS Driver can only be used with a SCSI
connection.
Precautions Concerning the IEEE1394 Interface
4
29